Deck StainThe Clear 00 System has exquisite wood grain illumination like no other.
The cashew resin has inherent mold resistance properties naturally. UV / IR radiation are reflected back out to space. Wood gains a rich natural color that only nature can provide. Greying wood is a thing of the past. Maintenance is as simple as washing and rolling on a clear coat as needed! |
Log FinishProvides a waterproof shield.
Stops greying. Dramatically slows or fully prevents splitting. Wood fiber cell saturation occurs deep into the log. The Clear 00 System can even be used clear (no tint). We have seen clear logs last over 5 years, even near the ground where water splashes! Our special cashew resin filters harsh sunlight and resists mold growth. Bugs hate it. Zinc Oxide and Boric Oxide are infused into the wood fiber cell during the Rainforest Sealer coat. Then the Mountain XT Clear 00 locks that in and provides a sacrificial barrier, reflecting UV / IR radiation back out to space and stopping water from entering. Without water, mold can't grow. With this system, wood doesn't turn grey and all future maintenance coats are a simple clear coat of Mountain XT Clear 00. Simple. Beautiful wood grain illumination! |
The Best Wood Finish System on Earth!Clearly the combination of Lime to clean the wood, pine resin, minerals and oil to stain and the cashew to seal is a magical combination the Earth has provided.
Lime has an incredible relationship with wood. It always has. Rainforest Sealer has generous portions of Zinc Borate. This non leaching mineral / element combination is inorganic and doesn't break down in sunlight the way that chemical biocides do. It stays locked in the wood fiber cell by dense natural tree resins. Our unique Cashew resin is the cherry on top. It has natural UV/IR radiation filters and mold resistance. Any surface outside will get dirty and eventually need maintenance. The Clear 00 System simply makes that easier. Just wash and roll out a bolstering coat as needed. Wood can be maintained indefinitely with this system. |
MahoganyAn absolutely gorgeous wood finish for exterior wood.
Allows Mahogany to do what it was meant to do...Look Awesome! Stops greying. Use Clear and allow the natural wood grain to be fully illuminated for all the world to see. Can be tinted to enhance the wood tone and match existing color schemes. |
Tropical Hardwood DecksThe Clear 00 System is the most beautiful wood finish on exotic hardwoods.
This system provides a way to easily stop greying and rot by simply rolling on a clear coat as needed. The system is more work at the outset but then maintenance is much easier. THE CLEAR 00 SYSTEM 1. Lime Clean 2. Sand 35-50 grit 3. Rainforest Sealer 4. Mountain XT Clear 00 x 2 coats. |
A Clear Topcoat for Exterior Wood.
For the best exterior wood finish apply this topcoat over Rainforest Sealer. Apply 1 or 2 coats, until the wood fibers are completely covered. This is a super long lasting wood finish that resists greying and black mold stains better than anything we have seen. With this hard, weather barrier film wood will stay dry and safe. This tough cashew resin film can be easily maintained and washed, indefinitely.
Bolstering a Mountain XT Clear 00 Top Coat: Optional.
It can be helpful to come back after the first 12-24 months and brush on another coat of Clear 00. Although the wood may look perfect at this point it is a good time to bolster the coating. Wood that is freshly coated tends to settle into its new coating. It dries out slowly and condenses firmly into it's new fully encased protected state. At this point it is good to give it a fresh coat to bolster the outer barrier and really seal the wood. This reduces prep in the long run and increases the overall longevity of the the Clear 00 topcoat. Washing the surface and brushing on a topcoat goes very fast and uses a relatively small amount of product. We have regularly gotten over 700 sft / gallon when bolstering a Clear 00 Top coat. By doing this the overall maintenance is reduced.
Cimate Regions:
High moisture, mold and mildew climates do fantasic with this product. The cashew resin is impervious to water. Snow and Ice: Mountain XT has proven itself through intense cold, snow and ice. For high sun desert conditions where high intensity sunlight persists relentlessly we recommend applying a bolstering coat in 6-12 months and every year after that or as needed based on each specific project.
Pressure Treated Wood:
We only use Mountain XT Clear 00 on Pressure Treated wood when it is weathered and in the shade.
Moisture Content:
Wood must be below 18% moisture content to recieve any film. If wood is at or below 18% use a single coat of Mountain XT - Tint Base or Rainforest Sealer and wait one year to apply the Mountain XT Clear 00 topcoat.
For the best exterior wood finish apply this topcoat over Rainforest Sealer. Apply 1 or 2 coats, until the wood fibers are completely covered. This is a super long lasting wood finish that resists greying and black mold stains better than anything we have seen. With this hard, weather barrier film wood will stay dry and safe. This tough cashew resin film can be easily maintained and washed, indefinitely.
Bolstering a Mountain XT Clear 00 Top Coat: Optional.
It can be helpful to come back after the first 12-24 months and brush on another coat of Clear 00. Although the wood may look perfect at this point it is a good time to bolster the coating. Wood that is freshly coated tends to settle into its new coating. It dries out slowly and condenses firmly into it's new fully encased protected state. At this point it is good to give it a fresh coat to bolster the outer barrier and really seal the wood. This reduces prep in the long run and increases the overall longevity of the the Clear 00 topcoat. Washing the surface and brushing on a topcoat goes very fast and uses a relatively small amount of product. We have regularly gotten over 700 sft / gallon when bolstering a Clear 00 Top coat. By doing this the overall maintenance is reduced.
Cimate Regions:
High moisture, mold and mildew climates do fantasic with this product. The cashew resin is impervious to water. Snow and Ice: Mountain XT has proven itself through intense cold, snow and ice. For high sun desert conditions where high intensity sunlight persists relentlessly we recommend applying a bolstering coat in 6-12 months and every year after that or as needed based on each specific project.
Pressure Treated Wood:
We only use Mountain XT Clear 00 on Pressure Treated wood when it is weathered and in the shade.
Moisture Content:
Wood must be below 18% moisture content to recieve any film. If wood is at or below 18% use a single coat of Mountain XT - Tint Base or Rainforest Sealer and wait one year to apply the Mountain XT Clear 00 topcoat.
|
|
|