Mountain

Floors | Furniture | Trim | Logs

 

Mountain is the hardest finish we offer.

It is a sustainable, Cashew based technology that is very useful on medium to high traffic floors and woodwork.

 

 

 

---

The worlds only 100% natural, ROCK HARD natural wood finish. A healthy sustainable finish made from Cashews! No Polyurethane. No Isocyanates! Highly Durable.

 

 

---

Product Description

 

Making a difference: The Worlds only 100% Natural Urethane! There's no polyurethane like this! This hard coating comes fromNuts, Veggies and Fruit, 100% renewable resources. The components are non food source, renewable waste products which means they do not contribute to the current farmland and food shortages that soy or corn Bio Fuels have contibuted to.

We've been able to exceed the hardness, chemical and water resistance of many polyurethanes while achieving a georgeous natural glow!

Doesn't have it!: Earthpaint never uses n-methyl pyrrolidone (NMP) the low odor, toxic solvent in water based polyurethanes (yep, even some "green" ones) and we never will!!! Nor do we use ethyl benzene, xylene, isopar (mineral spirits), stoddard solvent or poisons like these (also in some so called "green" products). We use pure, renewable citrus solvents made from the waste of oranges! Citrus is currently the most responsible option for coatings when all things are considered. Mountain does need to be used properly so read Brochure, TDS, MSDS and Labels before using.

 

 

---

Application Summary

 

Square Foot Coverage: Figure 600-800 Sft / gal on most hardwoods. Less on soft woods. Apply 3 coats medium traffic. 4 coats high traffic.

Application: Wear skin protective clothing, read TDS, MSDS and label before using. Mop or roll on thin coats, every 24-48 hours, lightly sand in between coats with 150 grit. Use a 3/16" or 1/4" roller nap, lint free. Do not allow to puddle at the end of the wall. Apply with the wood grain direction.

Dilute 3:1: For example; Add 3 gallons of Mountain TO 1 gallon of Pure Citrus Solvent. This will make the perfect consistency for rolling. Don't roll undiluted Mountain. It's fine to mop on undiluted Mountain.

Dry: Open windows and turn on fans to allow fresh air into the room BEFORE coating the room. If humidity level is high mountain will take longer to dry. If no air is circulating Mountain will take longer to dry. Keep warm, dry air circulating and you should be able to reapply after an overnight dry.

Maintenance Recoats: Mountain needs to be sanded very well, completely deglossed, when applying maintenance coats on top of an already cured and hardened floor. This does not apply to a floor that has only been drying for a a few days. But Mountain rapidly gains hardness after a week.

Clean Up: Pure Citrus Solvent

 

 

 

---

Application Video Demo

 

 

 

 

---

 

Printable Product Literature

 

---